Contact Us

Seller: Johnny Zuo

Tel:+86-755-84716343          

Fax:+86-755-84199880 

Phone:0086-13825288539         

Email:johnny@xn-gk.com    

Add::NO40,Jianlong street ,Baoan community,Henggang town, Longgang area, Shenzhen city, Guangdong, China

Silent Hood HEPA box

Silent Hood filter is a compact and low noise reasy to install HEPA/ULPA filter diffuser final filtration solution for clean rooms.

InquiryChat Now

  • Product Details

Silent Hood is a filter for final filtration for clean room, THis filters are used in pharmaceuticla, microelectronic industries requiring a strict controlled environment. The filters are available from H 13 to H14 ratings with MPPS 99.95% to 99.995%. The media packes are constructed by pleating to form a media pleat symmetry by "Controlled Media Spacing(CMS) to ensures a uniform airflow through the entire surface of the filter.

The media performance with intermediate hotmelt separators are to ensure uniform pleat spacing and to form a rigid selfj-supported media pack. The media pack is permanently sealed to the filter frame of the module with a solid polyurethane sealant. The frame is made from extruded and anodised aluminium with the top connection spigot available in diameters of 305mm or 250 mm depending on the model. The gaskekt seal is seamless polyurethane gasket applied to its frame to eliminate the risk of air bypass.


Every filter is individually tested and certified accordance with EN 1822: 2009 with a separate Scan Test protocol and serialized on the product lable.


Silent Hood filter XN 14 HL

H14 compact filter -diffuser for clean room

Ready to install

Quiet LW=35dB

Laminarity+/- 20%


SPECIFICATIONS

APPLICATION
Final filtration for clean rooms
FRAME
Anodized aluninium 
MEDIA
Glass fiber
MAX TEMPERATURE
70℃
RELATIVE HUMIDITY
100%
SEPARATOR
HotMelt
GASKET
Neoprene
SEALANT
Polyurethane
MAX AIRFLOW
Nominal flow rate(if not , efficiengcy drops)
MAXIMUM PD(PA)
MD:500PA; MX:600 Pa; MG: 899 Pa
COMMENTspigot with outer diameter 160mm, 250mm or 315 mm depending on the model 
Remarks: Individurally scan-tested acc. EN 1822: 2009 with protocol and packed in PE-foil. Other editions on request.

 

 STANDARD SPECIFICATION

ModelExternal dimensions (mm)Rated air flow(m3h)Initial resistanceEfficiencyDust capacity
XN-T1610x610x1501000≦220≧99.99600
XN-T2
915x610x1501500≦220≧99.99900
XN-T31220x610x1502000≦220≧99.991200


Hot Tags: Silent Hood HEPA box, manufacturers, suppliers, factory, wholesale
  • Feedback